DOD S1+, Руководство пользователя

Страница: 10 / 54

9
Use and Installation
 Install and Take out Battery
1. Slide battery cover downward to open it.
2. Put battery into battery case based on plus-minus marks on it until it is installed in position.
3. Battery power symbols are shown as below:
4. Push open the battery cover and take it out.
 Install and Take out Memory Card
1. Insert memory card into the slot as instructed until it is fixed in the slot.
2. When taking memory card out, press it down gently and take it out after the card pops up.
Attentions:
1. Insert in the SD memory card before use.
2. Before use, check if the write-protect switch on the card is on or off.
3. Please pay attention to the direction of card, if it is inserted reversely, the machine and
card might be damaged.
4. If the memory card is incompatible with the machine, please insert it again or retry
with another card.