2
QUICK START
1. Enable the effect with the EFFECT ON footswitch (the LED to the right of the footswitch will light
solid green when the effect is enabled).
2. Use the TIME, REPEATS, and LEVEL knobs to set the delay interval, amount of repeats, and delay
output level. Use the TAP RATIO switch to set the ‘feel’ of the delay.
3. Use the modulation RATE and DEPTH knobs to subtly vary the delay time. This provides slight
chorusing to the delay repeats.
4. Use the GAIN knob to control the amount of distortion added to the delay signal. Use the TONE
knob to alter the delay signal’s tone.
5. Set the TAILS switch to the desired position:
• On+NoDry – The dry signal will be muted when the effect is on.
• On – Delay repeats will continue once the effect is bypassed.
• Off – Delay repeats are cut off immediately once the effect is bypassed. If you wish to use true
bypass, use this setting.
Use these additional features to take your delay effects to the next level:
• Tap Tempo
Tap the TEMPO/REGEN footswitch to adjust delay time hands free. Each tap interval will modify the
delay (indicated by the LED to the left of the footswitch) to match the tapped intervals. Used in
conjunction with the TAP RATIO switch, you can get triplet or double-time delays based on the tap
interval.
• Rubbernecking
Press and hold the EFFECT ON footswitch to enable ‘Rubbernecking’, a feature where the delay time
is stretched or compressed in time. This can create ‘dive bomb’ or ‘chipmunk’-like delay stabs during a
performance. Use the RUBBERNECK RATE control to adjust the attack/release of the delay stretching.
• Repeats Oscillation
Press and hold the TEMPO/REGEN footswitch to momentarily enable the REGEN ADJUST control. This
is essentailly a secondary feedback control that overrides the REPEATS knob setting with the REGEN
ADJUST pot setting whenever the TEMPO/REGEN footswitch is pressed and held. By setting different
REPEATS and REGEN ADJUST settings, you can go from single repeats into oscillation oblivion and
back by holding and releasing the TEMPO/REGEN footswitch.
• Loop Send/Return
The Loop Send/Return jack lets you insert other effects (e.g., distortion, ring modulator, phaser,
flanger) into the feedback path of the delay signal. This lets you create wild delay effects that can
dynamically change in sound with every repeat.
Содержание rubberneck
Страница 1: ......
