DOD LS370W+, Руководство пользователя

Страница: 13 / 43

Installing Your Camera
4. Adjust the Angle
Set your camera to the best angle, which do not be blocked by the rearview mirror. The mount has an
adjustable ball joint, which can be loosened using the plastic locking nut. Angle your camera slightly
below the horizon line to minimize glare.
5. Connect the Cigarette Lighter Adapter
If you have not done so previously plug the cigarette adapter into your vehicle’s power port. Insert
the USB plug (opposite end of the power adapter) into the USB port on the camera. The wiring can be
hidden in the headliner and the various seams and rubber strips around the perimeter of the
windshield.
6. Remove the Protective Lens Cover
Congratulations! Your camera is now installed and ready for daily use.
Tips:
Remove any grease, fingerprints, or dirt and dust from the external or internal side of your
windshield to ensure the best recording.
Do not turn on Motion Detection unless your vehicle is parked. If Motion Detection is enabled while
driving, the camera may not continuously record.
DOD Tech recommends setting the G-Sensor to low.
11