DOD hummer, Руководство пользователя

Страница: 16 / 48

14
Installing Your Camera
Hardwiring Cable
9. Test Setup
Insert the USB connector into the dash camera to test if the wiring solution is operational. If
the camera turns on with the ignition off, your installation is successful. If the dash
cameradoes not power on, the fuse adapter may be installed incorrectly. Verify that steps 3, 6
and 7 were performed correctly.
Before verifying steps 6 and/or step 7, first unplug the fuse adapter to prevent
possible electrical shock
10. Clean Up & Tidy Installation
Ensure the camera is securely mounted to your motorcycle. Connect the USB plug into the
USB port of your camera. At this point, the remaining cables can be bound together and
tucked into the fuse box compartment.