DocuSign Signature Appliance, Инструкция по эксплуатации

Страница: 6 / 11

221 Main Street, Suite 1000, San Francisco, CA 94105
Ι
Tel. 866.219.4318
Ι
www.docusign.com
Ι
© DocuSign, Inc.
2. On the front rail-support and rear rail-support clip two M5 square nuts to the flange at the end
of each rail-support, as shown in Figure 1 .
These nuts are used to secure the rail-support to the rack post.
Figure 1
3. At the front right-hand side of the rack, attach the front rail-support to the rack post by
screwing an M5x16 screw (item 3 in Figure 2 ) with an M5 washer (item 2 in Figure 2 ) through
each square nut (item 1 in Figure 2 ).
Figure 2
4. Similarly, at the rear right-hand side of the rack, attach the rear rail-support to the rack post
(see Figure 2 ).