Doc's SGP-3, Инструкция по эксплуатации, Страница: 3 / 11

3 | P a g e
Adjusting the length of the SGP
™
pole:
a. The SGP™ can be used full y collapsed or extended. Adjust the length of your pole accordingly.
b. To adjust the telescoping pole to the desired length, remove the wire bale pin, extend the pole
and reinstall the pin.
c. To remove the wire bale pin, place your pointer finger and middle finger inside the loop and
your thumb above the latch. With a firm grip, pull up and away from the pole tool as shown
below.
d. Once the wire bale pin is removed, slide the outer pole down or up to the desired hole and
reinsert the wire bale pin
. The inner pole tool section has holes every 2” on center for fine
adjustments.
e. Once the pole is adjusted to the desired length/height, lock the wire bale pin into place.