Docomo P-02A, Инструкция по эксплуатации, Страница: 95 / 212

93
Ph
on
ebo
o
k
1
Call up/Select an item to be stored
1
i
( )
1
Add to phonebook
≥
When you operate from the detailed mail display, select “Store” from the Function
menu and then select “Add to phonebook”.
≥
To store the address of the sender (or of another recipient of simultaneous mail)
of the received mail or the destination address of the sent mail into the
Phonebook, select “Store” from the Function menu and then select “Store
address”. If the addresses of the sender and another recipient of simultaneous
mail are found or the multiple destination addresses are found, select a mail
address or phone number to be stored.
≥
To store a still image in the Phonebook, select “Set display” from the Function
menu and then select “Phonebook”.
≥
When “Add to phonebook” is displayed on the Scanned Code Result display for
Bar Code Reader, select “Add to phonebook”; then other information in the
scanned code besides the phone number or mail address is entered into each
field.
2
Phone or UIM
1
Select a storing method.
New . . . Go to step 2 on page 88.
Add . . . Adds data to the existing Phonebook entry. When storing data on the
UIM, “Overwrite” is displayed.
3
Select a search method
1
Search the Phonebook
1
Select a Phonebook entry to be stored
1
O o
( )
The phone number or mail address is entered automatically.
≥
See step 2 on page 88 to edit other items in the Phonebook entry.
≥
When you store into the FOMA terminal’s Phonebook, you can remain the
original entry and store a new entry into a different location by changing the
memory number.
4
l
( )
1
YES
≥
If you store the entry in the UIM Phonebook, select “Overwrite” to overwrite the
original entry, or select “Add” to store it as a new entry.
Information
≥
The Phonebook entry does not store the information of “Notify caller ID” included in
Redial/Dialed Calls. To set Caller ID Notification, add “186”/“184” to the phone
number and store it.
You can utilize the Phonebook by sorting the entries by group such as
“Company” or “Friend”, or by your interest such as “Baseball” or
“Ceramic art”. You can set a ring tone, vibration pattern, or illumination
by group.
1
m
1
Phonebook
1
Group setting
≥
The groups on the UIM are indicated by “ ”.
≥
To reset the group names and respective settings by group, which have already
been stored, press
i
( ), select “Reset group”, and then select “YES”.
2
Highlight a group and press
l
( )
1
Select an item to be set
1
Set the contents.
≥
When you select “ Group name”, enter a group name. You can store up to 10
full-pitch/21 half-pitch characters. However, you can store only up to 10
characters (regardless of full-pitch or half-pitch characters) when you enter both
full-pitch and half-pitch characters for a UIM group name.
≥
See step 2 on page 88 for the operations of the other items. However, you cannot
set for groups on the UIM.
≥
Select a stored group, or press
i
( ) and select “Check setting” to check
its settings. However, you cannot check the settings of the groups on the UIM.
3
Press
l
( ).
≥
Characters that cannot be stored may be replaced by spaces or deleted, and then
stored.
≥
You may not be able to store the information from some sites into the Phonebook.
<Group Setting>
Setting Groups
Information