Docomo FOMA P905ITV, Инструкция по эксплуатации

Страница: 541 / 596

8
5
Click “ はい (Yes)” to restart Windows.
The uninstallation is then completed.
≥
If you click “ いいえ (No)”, restart Windows manually.
You can make data communication by connecting a
Bluetooth compatible personal computer wirelessly to
your FOMA phone.
To connect a personal computer to the FOMA phone for
the first time, register the personal computer to the
FOMA phone.
1
m
1
LifeKit
1
Bluetooth
1
Accept dialup devices
2
Enter your Terminal Security Code.
≥
To cancel, press
O o
( ) in standby. When no connection is
made for five minutes in standby, the connection is automatically
released.
≥
During standby, “ (blue)” lights.
3
Search and register the Bluetooth device from
the personal computer.
≥
Register the device from the personal computer while the FOMA
phone is in standby.
≥
Refer to the operating manual of your personal computer for the
details of how to operate it.
(Depending on the personal computer you use, “
探索 (search)” or “
サーチ (search)” is used instead of “ 検索 (search)”, and “ ペアリン
グ
(pairing)” is used instead of “
機器登録
(register devices)”.
4
When the display for connection request
appears, select “YES”.
.
Information
≥
If you remove the FOMA USB Cable with Charge Function 01/02 from
the personal computer while installing the “FOMA communication setup
files” (driver) or click the “
キャンセル (Cancel)” button to stop
installation, the “FOMA communication setup files” (driver) may not be
installed correctly. In this case, open “P905iTV_USB_Driver”
→
“Drivers”
→
“Win2k_XP” inside “FOMA P905iTV CD-ROM”, and
execute “p905itvun.exe” to delete the “FOMA communication setup
files” (driver), and then install the files again.
Dial-up Communication Service
Preparing Bluetooth Communication
Connect to Personal Computer for the
First Time
< >
5
Select the text box for a Bluetooth pass key
1
Enter the Bluetooth pass key
1
Set
≥
You can enter 1 through 16 half-pitch alphanumeric characters for
the Bluetooth pass key.
≥
Enter the same Bluetooth pass key for both the FOMA phone and
personal computer.
6
The personal computer is registered and a
wireless connection starts.
When the connection is completed, “ (blue)” blinks.
Before setting communication, confirm the name and
COM port number of the modem used for connecting the
dial-up service.
1
<For Windows XP>
“ スタート (Start)”
1
Open “ コントロールパネル
(Control panel)”
1
“ パフォーマンスとメンテナ
ンス (Performance and maintenance)”
1
Open “ システム (System)”.
<For Windows 2000>
“ スタート (Start)”
1
“ 設定 (Setting)”
1
Open “ コントロールパネル (Control panel)”
1
Open “ システム (System)”.
2
Click the “
ハードウェア
(Hardware)” tab
1
Click “
デバイスマネージャ
(Device manager)”.
3
Click each device, then confirm the modem
name or COM port number.
The modem name or COM port number is displayed under “ ポート
(COM と LPT) [Port (COM/LPT)]” and “ モデム (Modem)”.
Information
≥
You cannot place the devices using the Headset service or Hands-free
service in the state of “Accept registered” while the FOMA phone is in
the state of “Accept dialup devices”.
≥
When the personal computer found multiple devices for registering the
FOMA phone on the personal computer, identify the FOMA phone by the
device name. When the personal computer found multiple devices having
the same device names, identify the FOMA phone by the device address.
≥
In the state of “Accept dialup devices”, searches are made from all the
Bluetooth devices around, however, you cannot connect to any service
other than the Dial-up Communication service.
■
To connect to the registered personal computer
When you connect to the FOMA phone from a registered personal
computer, place “Dial-up” in the state of “Accept registered”. Then you
can make a connection from the personal computer to the FOMA phone
by operating from the personal computer. You can connect even in the
state of “Accept dialup devices”.
Confirm the Modem
To set an access point with the “FOMA PC setup software”, see page 10.
To set an access point without the “FOMA PC setup software”, see
page 20 or page 30.