Docomo FOMA D905I, Руководство пользователя

Страница: 40 / 513

38 Before Using the Handset
Turning the power on/off
Power ON/OFF
･
When you turn on the power of the FOMA terminal for
the first time, perform initial settings.
☛
P38
･
Before turning the power on, check that the UIM is
properly inserted.
1
f
(for over 2 seconds)
The wake-up screen appears and then the standby
display. The wake-up screen may take some time
to appear.
･
The default signal level icon differs depending on
the color of the FOMA terminal.
･
If the date and time are not set, a message
appears indicating that. When the FOMA
terminal receives the time information and the
time is automatically corrected, the message
disappears.
･
To set the date and time manually:
o
1
f
(for over 2 seconds)
INFORMATION
●
When you turn on the FOMA terminal after replacing the
UIM, entry of the 4 to 8-digit terminal security code is
required. After entering the correct terminal security
code, the standby display appears. If a wrong terminal
security code is entered 5 times consecutively, the power
is turned off (but can be turned on again).
● When you turn on the FOMA terminal, the PIN1/PIN2
code entry screen appears depending on the setting.
☛
P113, P359
●
When
Normal use
of
Display light time
in Display Light
Setting is set to other than
Always
, if you do not press any
keys for about 90 seconds, the screen display
disappears.
☛
P102
Making initial settings
Initial Setting
When you turn the power on for the first time, set the
date and time, terminal security code, keypad sound
and other settings.
1
Turn the power on
☛
P38
2
Set each item
z p
･
If you press
f
to end the operation without
setting
Password
or
Request permit/deny
, a
confirmation screen appears. If you select
Yes
and quit, the initial setting screen appears the
next time you turn on the power.
･
You can quit in the middle and change the
settings afterward.
･
When Initial Setting is completed, a confirmation
screen for Software Update appears.
Turning the power on
Icon
Received
signal
level
Strong Weak Outside the
service area or
where radio
waves are hard to
reach
Turning the power off
Reading the UIM
Received signal level
(Signal level icon)
Standby display
Date & time
：
Enable or disable the automatic time correction
and set the date and time.
☛
P39
Password
：
Set the terminal security code used for various
terminal operations.
☛
P113
Request permit/deny
：
Set whether to permit Location Request and
provide the location information.
･
Regardless of the actual setting,
Always permit
is highlighted.
･
To set the permission period, use Request
Permit/Deny.
☛
P246
Text size
：
Set the font size on the character entry screen, mail
view screen, phonebook details screen or site
screen.
☛
P109
Keypad sound
：
Set the sound generated when pressing the
keypad.
☛
P94
Speed selector sound
：
Set the sound generated when rotating the
Speed Selector.
☛
P94
Slide sound
：
Set the sound generated when opening/closing
the FOMA terminal.
☛
P94
Motion control setting
：
Set the functions for Motion Control.
☛
P341