Docomo FOMA D702iF, Руководства

Страница: 154 / 451

152
S
a
fet
y
S
e
tti
ngs
Disabling the key operation each time FOMA terminal is closed
Lock on Close
If you set Lock on Close to
ON
, you need to enter the terminal security code each time you open FOMA
terminal. This prevents unauthorized use of your FOMA terminal by others.
･
Even if Lock on Close is on, you can answer incoming calls and turn off the power.
1
m8313
2
Enter the terminal security code
z 1
･
To set not to activate Lock on Close when FOMA terminal is closed: Enter the terminal security code
z
2
3
Close FOMA terminal when it shows its standby display.
Lock on Close is set and a message appears on the sub-display indicating that Lock on Close is set.
1
Open FOMA terminal and enter the terminal security code
･
If the standby display reappears by pressing
f
, is indicated. When you press
b
or a dial key
(
0
to
9
), the terminal security code entry screen is displayed. Key operations other than that will be
invalid.
･
Lock on Close is set every time you close FOMA terminal.
INFORMATION
●
Lock on Close is not set even though FOMA terminal is closed on the display other than the standby display. Also, it is
not set if a message appears on the standby display. Press any key other than
b
to delete the message and close
FOMA terminal.
●
While Lock on Close is set, when there is an incoming call from the caller registered in the phonebook, only the caller’s
name or image appears and a phone number is not displayed.
●
During a call while Lock on Close is set, Voice Memo/Video Memo cannot be activated and only switching the
speakerphone function on/off, putting calls on hold or adjusting Listen Volume is available. During a video-phone call,
the main screen and sub screen can be switched and the substitute image and your self image can be switched as well.
●
While Lock on Close is set, Lock on Close is activated by turning the power off and on. In addition, while Omakase Lock
(Remote Lock) is activated, Lock on Close is set by canceling Omakase Lock.
●
In case i-
α
ppli starts automatically while Lock on Close is on, press
b
and enter the terminal security code to operate.
●
Even when Lock on Close is activated, you can make a voice call by holding down the switch of the flat type earphone/
microphone set with switch (optional) for over a second or answer voice calls or video-phone calls.
To make emergency calls (110, 119, or 118) when Lock on Close is on, enter an emergency call
number on the terminal security code entry screen and press
n
. However, when returning to the
standby display after pressing
f
on the terminal security code entry screen, enter the emergency
call number and press
n
. Entered emergency call number is displayed as “ ＊ ”.
Default OFF
Operating FOMA terminal while Lock on Close is on
Lock
on Close