Docomo F-05C, Инструкция по эксплуатации

Страница: 109 / 133

15
Setting communications without using DOCOMO
Connection Manager
The method of dialup connection setup without DOCOMO Connection Manager is explained.
･
When using an access point compatible with HIGH-SPEED such as mopera for packet communication,
make settings using DOCOMO Connection Manager.
◆ Flow of dialup network setting
･
Flow of setup for data communication
→
P4
･
Before operating, make sure that a PC and FOMA terminal are properly connected.
*
Set for packet communication.
Communication software to input AT commands is required for settings.
The method of setting using " ハイパーターミナル (Hyper terminal)" that comes with Windows XP is
explained here. Windows 7 and Windows Vista do not support " ハイパーターミナル (Hyper terminal)". For
Windows 7 and Windows Vista, set using the software supported by Each OS (Follow the method for the
software to be used.).
◆ Setting the dialup connection (APN)
❖
The dialup connection (APN) and registration number (cid)
The dialup connections (APN) for packet communication can be set for registration numbers (cid) between
1 and 10 in FOMA terminal. By default, "mopera.ne.jp" (APN) to connect to mopera is registered in cid1,
"mopera.net" (APN) to connect to mopera U is registered in cid2 and 3, and "mpr.ex-pkt.net" (APN) to
connect in 128K communication is registered in cid4. For connecting to other providers or corporate LANs,
register APN for cid5-10.
･
For the dialup connections (APN), inquire your provider or network administrator.
･
The dialup connection settings can be considered as phonebook entries registered for packet
communication. The comparison between dialup connection settings and FOMA terminal phonebook is
as shown below.
･
The registered cid become the connection number in the dialup connection numbers setting.
Connection (APN) Phonebook item
Registration number (cid) Registration number (Phonebook No.)
Connection name (APN) Party's name
＊ 99 ＊＊＊ <cid># (packet communication)
Party's phone number
Setting the dialup connection (APN)*
→
P15
・ When the access point is mopera U or mopera, you do not need to set.
Setting Show/Hide caller ID* → P17
・ Set as required.
Setting Dialup Network
・ Setting for Windows 7, Windows Vista → P18
・
Setting for Windows XP
→
P20