Docomo F-02J Скачать руководство пользователя страница 29

Страница: 29 / 33

Appendix

certified power level, the actual SAR level of the phone
while operating can be well below the maximum
value. This is because the phone is designed to operate
at multiple power levels so as to use only the power
required to reach the network. In general, the closer
you are to a base station antenna, the lower the power
output.

The manufacturer of this product is Fujitsu Connected
Technologies Ltd. with its registered place of business at
1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki,
Kanagawa 211-8588, Japan.
The Authorized Representative for RED is Fujitsu
Services Ltd. with its registered place of business at 22
Baker Street, London, U.K, W1U3BW.

◆

Federal Communications
Commission (FCC) Notice

･

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions :

this device may not cause harmful interference,
and

this device must accept any interference received,
including interference that may cause undesired
operation.

･

Changes or modifications made in or to the radio
phone, not expressly approved by the manufacturer,
will void the user's authority to operate the equipment.

･

The device complies with 15.205 of the FCC Rules.

◆

FCC RF Exposure Information

This model phone meets the U.S. Government's
requirements for exposure to radio waves. This model
phone contains a radio transmitter and receiver. This
model phone is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy as set by the FCC of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based on
standards that were developed by independent scientific

organizations through periodic and thorough evaluation
of scientific studies.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is
1.6 W/kg. Tests for SAR are conducted using standard
operating positions as accepted by the FCC with the
phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use
only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the
lower the power output level of the phone.
Before a phone model is available for sale to the public,
it must be tested and certified to prove to the FCC that it
does not exceed the limit established by the U.S.
government-adopted requirement for safe exposure.
The tests are performed on position and locations (for
example, at the ear and worn on the body) as required by
FCC for each model. The highest SAR value for this
model phone as reported to the FCC, when tested for use
at the ear, is 0.629 W/kg*, and when worn on the body, is
0.795 W/kg*. (Body-worn measurements differ among
phone models, depending upon available accessories
and FCC requirements).
While there may be differences between the SAR levels
of various phones and at various positions, they all meet
the U.S. government requirements. The FCC has granted
an Equipment Authorization for this model phone with
all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found
under the Equipment Authorization Search section at
http://www.fcc.gov/oet/ea/fccid/ (please search on FCC ID
VQK-F02J).
For body worn operation, this phone has been tested and
meets the FCC RF exposure guidelines.
Please use an accessory designated for this product or
an accessory which contains no metal and which
positions the handset a minimum of 1.5 cm from the
body.

･

In the United States, the SAR limit for wireless mobile
phones used by the general public is 1.6 Watts/kg (W/
kg), averaged over one gram of tissue. SAR values
may vary depending upon national reporting
requirements and the network band.

* Including other radio systems that can be simultaneously

used with cellular radio wave.

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.

Radio type / Description

Transmitter

Frequency

Maximum

Output

Power

UMTS

FDD I

1920-1980MHz 24.5dBm