115
File Management
Prepare for automatic connection while charging
in advance.
Automatic transference is available while
charging with the wireless charger.
1
Activate MediaJet on a PC
2
Start charging
:
The handset is connected to MediaJet
automatically and transference starts.
3
Perform device removal by
MediaJet after use
The USB host function is installed in the
handset. You can use USB devices such as
mice by connecting a commercially available
USB cable for peripheral device connection to
the external connector terminal.
For details on the USB host function, refer to the
manuals of the USB cable for peripheral device
connection and USB devices.
You can display the same screen as that of the
handset on the TV by connecting the handset to
a TV with an HDMI terminal.
Connect a TV to the handset via a commercially
available MHL
™
cable to use. For details on
operation, refer to the manual of a TV.
For details on compatible devices, refer to the
“SH DASH”.
(
http://k-tai.sharp.co.jp/support/
)
(in Japanese
only)
1
Connect the handset to a TV via an
MHL
™
cable
:
If you pull out the MHL
™
cable, the MHL
™
connection will be terminated.
Automatic transference while
charging
USB host function
Connection with all USB devices is not
completely guaranteed. Devices that require an
electric current of higher than 100 mA are
unavailable.
MHL
™
connection
When you watch on a TV, set the screen size of
the TV side to full screen after the MHL
™
connection is established.
MHL
™
connection is not available overseas.
MHL
™
connection is not available when the
battery level is insufficient.
MHL
™
connection is not available depending
on the application being activated.
During the MHL
™
connection, you may not
receive 1Seg. Refrain from watching/recording
1Seg.
If you receive a call during the MHL
™
connection, the MHL
™
connection is
disconnected.
You may not be able to sufficiently charge the
battery during the MHL
™
connection depending
on the MHL
™
cable or TV.
