Dockin D Fine 15231, Руководство пользователя, Страница: 8 / 21

14 15
EN EN
After successful pairing, the blue LED on your D FINE stays lit and
you will hear a confirmation sound.
Connecting via NFC function:
This function is only available if your device supports NFC ( Near Field
Communication).
1. Activate Bluetooth® on the source device (Bluetooth®
settings).
2. Activate NFC on the source device.
3. Hold your source device close to the NFC logo on top of the
D FINE. First time connection via NFC needs to be confirmed on
your source device.
After successful NFC pairing, the blue LED on the D FINE stays lit
and you will hear a confirmation sound.
CHANGING THE SOURCE DEVICE/DISCONNECTING
To select a new playback device while still paired, the current
Bluetooth® connection needs to be disengaged.
• Disconnect the current Bluetooth® connection on the source
device.
or
• Push and hold the button on your D FINE for approx. 3
seconds.
TURNING THE D FINE OFF
• Hold the button on the top of your D FINE down for 3
seconds to switch the D FINE off.
AUX MODE
You can connect your D FINE to a source device using the provided
AUX cable (3.5 mm plug cable).
The D FINE power-saving mode is disengaged when the AUX
cable is connected. If the AUX cable and the mains adapter are
connected, this permits stationary use, for example as a PC
speaker or a TV soundbar.
1. Connect the source device to the AUX input of your D FINE
using the provided 3.5 mm plug cable.
2. Start playback on the source device.
CHARGING THE D FINE
• Charge your D FINE by using the provided power cable. The
charging port is located behind the cover on the side.
During charging, the rechargeable battery status LED is
green.
Once the device is completely charged, the LED turns off.
If the rechargeable battery has less than 15 minutes of charge
remaining, the rechargeable battery status LED will be red.
POWER-SAVING FUNCTION
If there hasn’t been any signal transmission or charging via the USB
output for 15 minutes, your D FINE turns off automatically. If the AUX
cable is connected, the power saving function is disabled. This allows
stationary use.
POWER BANK FUNCTION
The power bank function enables you to charge the source device
with your D FINE.