Attention! Be sure to read
this section before
assembling.
Before proceeding with the assembly of the frame, prepare sawn OSB
elements,15 mm thick
(map of pattern see below), a screws, a screwdriver and
drills for pre-drilling under
self-tapping screws.
All of this you will need during
assembly.
During assembly, be sure to fix a frame
,
securing the cladding on each
assembled horizontal tier
. The cladding, sawn exactly in size,
is also a template
for
precise positioning of beams and the braces of the frame for correct
convergence in the upper anchorage.
For installation of the cladding, please use galvanized screws 5х70 every 20 cm
perimeter.To drill 3 mm by 53 mm deep into the frame.
To piece together the
constituent elements
of the cladding,
consisting of several
parts is required.
Nagel must be attached to the braces with bolts and nuts and with washers as
indicated in the instructions.
The frame must be fixed on metal plates on top of the pile with a bolt screw
from below through the head to the vertical beam with preliminary drilling with a
depth of 120-150 mm.
© Factory
«
Dobrosfera
»
, 2018. Version 3.0
us.dobrosfera.com
3
