Press button to activate horizontal
measurement in the instrument. The
following symbol appears in the
display
If the button is active, the
horizontal distance is displayed in the
summary line for each distance
measurement ( up to max. +/- 45°and
up to max. a transverse tilt of +/-10°).
Press the button to collect the
measurement data, and the data will be
on the display. And hypotenuse
distance and angle will be on the
auxiliary display. ( Not including Type
DM2 )
标线
角度
测量
Horizontal measurement
Press this button to set a 5-second
time delay.
Or press and hold down this button until
the desired time delay is reached ( max.
60 seconds )Once the key is released the
remaining seconds until measurement (
e.g.
59, 58, 57... )
are displayed in a
countdown. The last 5 seconds are
counted down with a beep. After the last
beep the measurement is taken and the
value is displayed. The timer can be
used for all measurements.
定时
Timer ( self-triggering )
19
EN
Measuring
MEASURE
TIMER