background image

Introduction

Be familiar with the product before using it for the first time. 

Please read the following operating instructions and the safety 

instructions carefully. Use the product only as described and for the 

specified application areas. Keep these instructions. Hand over all 

documents when passing the product on to third parties.

Intended Use

This product is only suitable for the feeding of pets for private use. 

The product is not intended for commercial use.

General safety instructions

Damages caused by non-observance of these operating instructions 

will void the guarantee claim! No liability is assumed for conse-

quential damages! No liability is accepted for damage to property 

or personal injury caused by improper handling or neglecting the 

safety instructions!

Control Panel Keys

• 

CLOCK

 – displays clock (current time)

• 

TIMER 

– switches between preset feeding times

• 

VOL 

– sets the feeding volume/portion-size

• 

SET 

– enters SET

 

mode, confirms any feeding times you enter 

and advances to the next setting. Also used with VOL key to 

perform manual feedings

• 

START 

– starts the feeding schedule, confirms clock and 

feeding-time settings

• 

DAY

 – sets the number of days to feed

• 

REC

 – records your personal voice message

• 

PLAY 

– plays back your personal voice message 

• 

ON SWITCH 

– turns the feeder off. For when the feeder will 

not be used for an extended period of time. Turning this switch 

off WILL RESET all time and feeding settings

 

Control Panel 

 

                

LCD Display 

PM 

icon 

TIMER 

 

 

CLOCK 

 

Digit-1  Digit-2  Digit-3  Digit-4

 

Getting Started

1.  Open the battery door (under the unit)
2.  Insert four D-size alkaline batteries into the battery tray. Do 

NOT

 use old or -cheap- carbon batteries

3.  Close the battery door and switch on the feeder. The 

ON

 

Switch is next to the battery door (under the unit)

4.  The feeder will cycle once until (12:00) is flashing on the LCD 

display

5.  You now have 90 seconds to set the current-time in order for 

the feeder to work properly. If longer than 90 seconds passes 

then (1 07) will be displayed on the LCD. Simply turn the switch 

to 

OFF

, wait 1 minute, then repeat from step-3

Setting the Current Time

1.  All digits should now be flashing
2.  Press the 

CLOCK

 key to set 

HOUR

3.  Press the 

TIMER

 key to set 

MINUTE

4.  Press the 

SET

 key once to confirm time 

The display will show either 12 or 24 to indicate the display 

mode

5.  Press the 

CLOCK

 key to change between 12- or 24-hour display 

mode

6.  Press the 

START

 key to CONFIRM clock setup

7.  (1 07) will be flashing and you must now set the feeding times

Setting the Feed Time and Number of Feedings per Day

1.  (1 07) should now be flashing. Digit-1 is the feeding number 

(times per day), Digits-3 & 4 are the feeding time (in hours)

2.  The display shows the 1st feeding time (1 07)=(1st feeding at 

7 am)

3.  With (1 07) Flashing, Press and HOLD (for 2 seconds) the 

SET

 

key until Digit-3 & 4 start flashing (07)

4.  Press the 

TIMER

 key to set the desired hour for feeding. Note 

the (P) in the top left corner stands for 

PM

 when using 12 hour 

time

5.  Press the 

SET

 key to confirm your setting and proceed to the 

2nd feeding time

6.  Repeat step-4 to set the desired hour for feeding the SECOND 

feeding time

7.  At this point if you want to only feed 2 times per day press the 

START

 key and you’re finished

8.  If you wish to feed a 3rd or 4th time each day do NOT press the 

START

 key and repeat from step-4

Tip: If you pressed the 

SET

 key a 3rd time, but you did not want to feed 3 

times per day,  just press the 

TIMER

 key then press and hold the 

SET

 key (for 

2 seconds) to start over,  remember not press the 

SET

 key after the Second 

feeding, press the 

START

 key to end your number of feedings per day.

Setting the Volume/Portion-Size

1.  Press the 

VOL

 key to display feed-volume/portion-size

2.  Press and hold (for 2 seconds) the 

SET

 key until Digit-4 blinks

3.  Press the 

VOL

 key to set the desired volume

Note:  a) A Feed-volume of 1 equals ¼ cup (60cc) of food, 2 means ½ cup 

(120cc) of food, 3= ¾ cups (180cc) and so on. 

b) The number 0 represents 10 portions which is equal to 2.5 cups (liters).

4.  Press the 

START

 key to confirm the volume/portion size

Quick Start Guide

50131 Large-capacity Automatic Pet Feeder

Содержание 50131









Отзывы: