35.
T
he unit should be plugged in a socket, which is easily
visible and reachable.
36.
O
ne dark point may exist on the surface of the heating
elements during the first few minutes after it is turned on.
T
his is normal, and will not affect the performance of the
unit.
37.
T
he heater must not be located immediately below a
socket-outlet.
38.
Do not
use this heater in the immediate surroundings
of a bath, a shower or a swimming pool.
39.
W
ARNING!
I
n order to avoid overheating, do not cover
the heater
40.
Do not
use this heater with a programmer, timer,
separate remote-control system or any other device that
switches the heater on automatically, since a fire risk
exist if the heater is covered or positioned incorrectly.
41.
T
he appliance is not to be used by children or persons
with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have
been supervision or instruction.
42.
C
hildren being supervised not to play with the appliance
43.
I
f the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
44.
DO NOT
COVER!
Don’t
cover the unit with
anything during operation or a short time after it’s shut
down.
Assembling Process
Step 1
: Fix the Heater pole on the base by using the provided
3PCS of M6 * 25mm screws.
