- 12 -
English
Getting started
Software installation
Don‘t connect the inspection camera to the USB port
Insert the CD into the CD drive.
If the Setup-Assistant doesn´t start automatically please open the
Telescope Driver.exe.
Continue the software installation, if the Microsoft logo test window appears.
At the end click
Finish
button.
If you have a older OS installed, lik Windows98SE, it might be necessary to restart the PC
Connect the endoscope to the USB-Port of your computer .
Your computer opens the
Assistant for the search of new hardware
. Please choose
Install Software
automatically
and click
Next
.
Windows opens a Message that says the program failed the Windows-Logo-Test. This message just
means that Windows doesn´t know the software. You can go on with the installation by clicking
next
.
Click
Finish
to fi nish the installation. You can use the endoscope now.
Start-up
Start the program AMcap.
If you have more than one camera installed one your computer, an error message appears “
Cannot add vicap to fi ltergraph“. Choose the Telescope driver in the menu item „Devices“ .
Bedienung
Inspect the inspection camera before use and correct any problems to
reduce the risk of serious injury from electric shock and other causes and
prevent tool damage.
.
When you press the snapshot button on the endoscope, you can take a photo and the program “SnapShot
Reader” opens automatically to show the photo.
File: Save the photo
Exit (X): Exit the program
Rotate Orientation:You can turn the photo arround.
Program description
File
Set Capture File
:
Make a AVI-File to store exposures on the camera.
Allocate File Size:
Choose how much Memory-Space you can use for the photographs.
Save Captured Video
:
Choose where you want to store the videofi les..
Exit
:
Close the program
Operation