<Language>
You can select your desired language from the menu
<Factory Reset>
You can select this option to clear all the settings you have made and it will resume to the factory’s default settings. If you
confirm to do this, all the Presets, Language, selected ESSID, network configuration etc will be resumed to default setting.
<Register>
You can use this key number to register your unit on Reciva’s portal website. Please see the last instruction to know how to
register you unit
<Set Time/Date>
You can set the time and day of your local time. Once your unit is connected to Internet successfully, the time and date will be
set with Greenwich standard time.
<Backlight>,
You can set the LCD backlight level for active mode, inactive mode and standby mode.
Selecting this option will alter the internet radio’s backlight values.
1. After selecting the ‘Backlight’ menu item, the radio will display three modes: ‘Inactive’, ‘Active’ and ‘Standby’ as follow:
- Inactive mode: when there is no activity on the radio for 30 seconds.
- Active: when there is activity on the radio, e.g. controlling the buttons/making selection on the radio
- Standby: When the radio is being turned off.
2. Rotate the knob to highlight the desired menu mode and press SELECT.
3. The radio will now display the current backlight value for the menu mode. You can alter this value by rotating the knob to
increase or decrease it.
<Contrast>
You can set the LCD contrast level by adjusting the knob
1. After selecting the ‘Contrast’ on the menu, the radio will display the current value of LCD contrast ratio.
2. Tuning the knob to increase or decrease it until it is at the optimum level.
3. Press SELECT to confirm the change.
<UPNP>
Allow the user to configure the radio's UPnP device name. When the radio accesses a UPnP server, the server will display the
radio's configure device name in its list of clients
<WiFi Strength>
It shows the strength of the current WiFi signal.
Step 3- Listening you internet radio
To listen to the desired radio station, follow the steps below
1. Select the station by <Location>:
Location
Genre