DNP Imagingcomm America Corporation
5
Introduction
What is the DNP Wireless Connect Module (WCM2)?
The WCM2 is the second generation of the DNP Wireless Connect Module, allowing wireless printing from mobile devices
(iPhone, iPad, and Android devices), Windows PCs, and Macs, or by using the direct print web application–WCM Print. The
WCM2 broadcasts its own Wi-Fi network (hotspot) that allows wireless printing and access to the user web portal where
device settings and controls can be accessed.
The WCM2 can also be connected to a local Wi-Fi network. This provides internet access to anyone connected to the
hotspot. Also, anyone that is connected to the same local Wi-Fi network is then able to print through the WCM2 to the
connected printers. It is also possible to connect the WCM2 to a local network with an Ethernet cable which will provide the
same functionality as connecting to a local network using Wi-Fi. This is helpful when there is significant Wi-Fi interference.
Up to two DNP photo printers can be connected to the WCM2. Connecting two different printer/media combinations can
provide a wider range of print sizes or, having two identical printers/media attached can increase the speed of printing and
reduce the number of media re-loads.
What's Included in the Box
What’s Included in the box:
WCM2 Device
Power Adapter
Wi-Fi Dongle (already plugged into the WCM2 device)
Alternate Power cable (QW410 Only)
Printer Cable
ATTENTION:
Do Not Remove the Wi-Fi Dongle! It is required for proper operation.
Printer cable
Alternate power
cable
(QW410 only)
Power adapter
Wi-Fi dongle
(DO NOT REMOVE)
Ethernet port
USB ports
(DNP Printers
Power port
WCM2 Device