IDW500 SD Recovery Utility v1.2.0.10
Setting the SSID Number
The IDW500A SD Wi-Fi card must be
paired to the IDW500A console. If you
have received a replacement card or are
instructed to reset the SSID number on
your existing card by a support
technician, use the following procedure
to do so. Setting or resetting an SD card
SSID, or card name, allows you to
change the network label of the card to coincide with the IDW500A console. The ID for
the IDW500A console can be found on the main display in the upper right corner of the
LCD and on the POST printout. The names must match exactly.
NOTE: After performing a Repair operation on the SD card, the set SSID number must
also be performed to pair the card to the console before you can use the card.
Setting the card SSID Number
1.
Insert the card into the SD card adapter and into the PC where the SDR app is
installed.
2.
If you have not done so already, open the SD Recovery Utility.
3.
Locate the idPhoto_xx number for the IDW500A system. The number is located in
the upper right corner of the home screen on the console, or on the POST printout.
Enter only the characters after the underscore. Do not enter “idPhoto_” into the
text field. The “idPhoto_” tag will always remain the same. The identification number
after the tag varies depending on the console, but it is always two characters, lower
case is used for letters.
