22
Connecting with a host computer
Do not switch off the power of the
host computer during printing.
Do not use the sleep or the stand-by function on the host
computer.
If the power of the host computer is switched off during printing,
or if the sleep or the stand-by function of the host computer is
activated, the printer may stop with cards printed halfway remain
in the printer. When this occurs, initialize the priner as “Slopping
when printing”of page 44 on this manual.
1.
Check to ensure that the power of both the printer
and host computer are switched off.
2.
Connect the printer and host computer with the USB
cable.
Insert the USB cable to the USB cable connection terminal
at the back of the printer.
Set-up
(continued)
CAUTION
Adjust orientation of the USB cable
according to the terminal, and insert it all the way in.
Consult your dealer on the cable
connection if there are USB or serial cable connection
terminal on the printer’s optional port.
The location of terminals varies with the host computer.
Please refer to the instruction manual of the host
computer.
When there are multiple USB cable comection terminal
on the host computer, either one can be used.
Do not connect to the USB comection terminal on the
host computer’s monitor or keyboard. It may not be
recognized correctly.
When using a USB hub, connect to the hub that is directly
linked to the host computer.
CAUTION
CAUTION
CAUTION
Software Licensing Agreement
Before using the software contained in the CD-ROM
supplied, please read through the “Software Licensing
Agreement” at the end of this manual.
You will not be allowed to use this software unless you
have agreed to accept the terms stated in the agreement.
Operation Environment
Software in the attached CD-ROM operates in the
following environment.
WindowsXP Professional and Home Edition
Windows2000 Professional
When installing the software, log-on
shall be done by a qualified user(Administrators Group).
CAUTION
About software
The following softwares are required in order to use CX-
320. These are kept in the attached CD-ROM.
(1) CX-320 Printer Driver
Install the printer driver from the attached CD-ROM
when using CX-320 printer drivers. Refer to the electronic
file in the CD-ROM “Printer Driver Install Manual” for
method to install. Refer to the respective guide books
on the use of other printer drivers.
(2) CX-320 Status Monitor
Software that carries out various settings and indicates
the status of CX-320. Install into the host computer
that connects to CX-320.
Installation of Software
Refer to the electronic file “Printer Driver Install Manual”
(Installation PRD01
∗
.PDF) stored in the folder “English/
Document” ,and install the printer driver.
Do not power on the printer until the message “Power
on the printer” appears on the screen.
CAUTION
Connecting Multiple Printers
When connecting a host computer to multiple printers,
set different Unit Numbers from 1 to 7 for each printer.
Refer to see the page 35 of the instruction manual
USB cable
(Accessories)