Page 4 of 24
SW32PS RS422 Port Switcher
Getting Started . . .
2. DESCRIPTION
The SW32PS is a low cost 32-port switcher for RS422 routing.
Route VTR to VTR / Route Controller to VTR.
Automatically configures Ports.
Easy to read LCD Display has 4 lines by 20 characters.
Shows source (From) and destination (To) routing.
6-function keypad provides:
From (Select
Source)
To
(Select Device)
View From (View by Sources)
Take (Enable the selected route)
Gang
(User control of multiple destinations)
Menu
(User configuration Menu)
Ideal for: Television Stations, Video Productions, Cable TV,
Video Post Production, Duplication Houses
Versions Available
SW32PS-32
32 ports
SW32PS-24
24 ports
SW32PS-16
16 ports
SW32PS-8
8 ports
3.
INSTALLATION
a.
Plug one end of a 9-conductor, RS422 serial cable to a controller. Plug the other end of
the cable into any of the 32-port connectors on the back of the switcher.
b.
Plug one end of a 9-pin cable into a VTR/DDR/Video Server. Plug the other end into any
of the 32 connectors on the back of the switcher.
c.
Connect DB9F side of supplied power supply into the connector labeled “Power.” Then
connect the IEC to Edison cable to the power supply. Connect the power cable to 90
VAC to 240 VAC source.
Caution: Do Not Hot Plug the Power Supply (DB9F) !
Installation is complete.
NOTE
: Words enclosed in brackets, such as [
TAKE
] indicate buttons on the SW32PS. Buttons
shown with a “+” between them, for example [
SHIFT
] + [
TAKE
], indicate two keys pressed
simultaneously.
USO
RESTRITO
