ST600-KIPRO User Manual
Page
11
of
16
8. Function table
FUNCTION
KEYPRESS
DESCRIPTION
JOG
[
JOG
]
Select JOG mode and enable the Wheel.
MARK CUE
POINT
[
MARK
]
Save the current time in the currently displayed Cue
Point.
Mark only affects currently selected DDR. Cue points are
save in non-volatile memory.
*Marking a cue point in gang mode only affects the
Master (Blinking LED) Ki-Pro DDR channel. All other
channels in gang will not be marked.
RECORD
[
REC
]
Creates new clip and places Ki Pro into record
REWIND
[
RWD
]
Press RWD to Rewind Clip
*Note
- pressing RWD more than once will put into the
following Reverse speeds:
1
st
press= 2X speed
2
nd
press= 4X speed
3
rd
press= 8X speed
4
th
press= 16X speed
Fast Forward
[
FFWD
]
Press FFWD to Fast Forward Clip
*Note
- pressing FFWD more than once will put into the
following Reverse speeds:
1
st
press= 2X speed
2
nd
press= 4X speed
3
rd
press= 8X speed
4
th
press= 16X speed
SLOMO
[
SLOMO
]
Not supported by Ki Pro
STOP
[
STOP
]
Press once to stop clip transport or exit record
Enter Search
Time mode
[
GOTO
]
Search the Ki Pro to a specific time
To enter a GOTO location without altering the contents
of the Cue Point, Press [
SHIFT/ESC
]
+ [GO TO]
. Enter the
desired timecode using the designated keys with yellow
silkscreen. Press [
GOTO
] to search to the entered time.
Press [
SHIFT/ESC
] to exit without searching.
PLAY
[
PLAY
]
Press PLAY key to start transport
SHIFT/ESC
[
SHIFT/ESC
]
Pressing key will exit out of search time mode
Select
Ki Pro
For control
[1], [2], [3], [4]
Select which Ki Pro to control by pressing either
[1]
,
[2]
,
[3]
or
[4].
Red LED
will indicate which Ki Pro is currently
being controlled
EE Mode
[
STOP
]
Pres
sing “STOP” key twice will put
AJA Ki Pro into EE