14
4000CL-O, 400 Clip Fast Access System, Odetics Protocol
For Wheel only:
Press Softkey [
PRSET
] to select the SLOMO Preset Speed Mode.
Press Softkey [
UPDATE
].
When exiting SLOMO mode, the last used speed is saved in the Preset Speed register.
OR
Press Softkey [
STATIC
].
The Preset Speed register is NOT updated when exiting SLOMO mode.
It is only changed by [
SHIFT
] + [
SLOMO
] (PRESET SLOMO).
ST300
SETUP
Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00.
Press Softkey [
YES
] when asked “Are You Sure?”
Press Softkey beneath SetDefault to set ST300 to default settings.
Press Softkey [
YES
] when asked “Are You Sure?”
IMPORTANT NOTE:
Please set these items during initial installation.
DISPLAY
SOFTWARE
VERSION
The version number and date for the currently installed software is displayed. For example:
SYNC
Set to ON if black burst is supplied to the Ref Video connector on the rear panel. Set to OFF if no
blackburst is supplied.
RECORD
Press Softkey to select single button or 2-button record.
RECORD = [
REC
] Only.
OR
[
REC
] + [
PLAY
].
RECALL MODE
Press [
NORMAL
] or [
REDIR
] (redirect).
NORMAL –
The cue point will load on the learned VTR.
REDIR-
When one and only one clip is learned into a Cue Point, the Clip will be REDIRECTED to load on
the currently selected VTR.
ENTER PREROLL
Enter the desired preroll value using the ST300’s numeric keypad.
Turn wheel to save the entered value
OR
press [
ESC
] to exit without saving.
RECORD
DELAY
Enter up to 99 frames record delay (used in Capture Function).
Typical value is 3 frames.
TRANSMIT
CUELIST
Transmit Cuelist to another ST300 or to a PC.
See Section 12, “Transfer Cue List.”
RECEIVE
CUELIST
Receive Cuelist from another ST300 or a PC.
See Section 12, “Transfer Cue List.”
4000CL-O V3.0
072400
ST300 SETUP
Clear Cues
SetDefault
