13
2034CL-L, Vs.3.0, 300 Clip Instant Access System, Louth Protocol, PBIO
Option
Advanced . . .
11.
CREATE A CLIP
NOTE
:
New clips can be created ONLY if the INPUT Port is selected.
a. SET
THE
RECORD
DURATION
1) Press
[
SHIFT
] + [
REC
].
2)
The display shows current record duration. The second line of the display
shows “Enter Record Length” prompt.
3)
Enter the desired record duration using the ST300’s numeric keypad.
4) Press
[
ENTER
] to save the new record duration and exit.
OR
Press [
ESC
] to exit without saving.
NOTE
: Set Factory Defaults (in the SETUP MENU) sets the record duration to
1 hour.
b.
CREATE
A
NEW
NAME
1) Press
[
CLIP LIST
]. The CLIP LIST indicator turns on. The display will show
“CREATE NEW CLIP.”
2)
Press
[
LOAD
]. The display will show the default CLIP ID.
3) Press
[
LOAD
] to accept the default CLIP ID.
OR
Use [
NEXT CUE
], [
LAST CUE
] and Wheel to create a CLIP ID. Use the
[
NEXT CUE
] and [
LAST CUE
] keys to position the cursor. Turn the Wheel to
select the desired letter.
OR
Create an ID using the numeric keypad, with a maximum of eight characters if
extended IDs are OFF, and maximum of 20 characters if extended IDs are ON.
Press [
ENTER
].
4) Press
[
LOAD
] to create the selected CLIP ID. If the selected CLIP ID already
exists, a warning message will be displayed. To load the existing clip, press
[
ENTER
]. Press [
ESC
] to exit without loading the existing clip.
