Dnake S213K Скачать руководство пользователя страница 32

28 

 

SAFETY INSTRUCTION 

 

In order to protect you and others from harm or your device from damage, please 

read the following information before using the device. 

 

  Do not install the device in the following places: 

  Do not install the device in high-temperature and moist environment or the area close to 

magnetic field, such as the electric generator, transformer or magnet. 

  Do not place the device near the heating products such as electric heater or the fluid 

container. 

  Do not place the device in the sun or near the heat source, which might cause 

discoloration or deformation of the device. 

  Do not install the device in an unstable position to avoid the property losses or personal 

injury caused by the falling of device. 

 

Guard against electric shock, fire and explosion: 

  Do not use damaged power cord, plug or loose outlet. 

  Do not touch the power cord with wet hand or unplug the power cord by pulling. 

  Do not bend or damage the power cord. 

  Do not touch the device with wet hand. 

  Do not make the power supply slip or cause the impact. 

  Do not use the power supply without the manufacturer's approval. 

  Do not have the liquids such as water go into the device. 

 

Clean Device Surface 

  Clean the device surfaces with soft cloth dipped in some water, and then rub the 

surface with dry cloth. 

 

Other Tips  

  In order to prevent damage to the paint layer or the case, please do not expose the 

device to chemical products, such as the diluent, gasoline, alcohol, insect-resist agents, 

opacifying agent and insecticide.

 

 

  Do not knock on the device with hard objects. 

  Do not press the screen surface. Overexertion might cause flopover or damage to the 

device. 

  Please be careful when standing up from the area under the device. 

  Do not disassemble, repair or modify the device at your own discretion. 

  The arbitrary modification is not covered under warranty. When any repair required, 

please contact the customer service center. 

  If there is abnormal sound, smell or fume in the device, please unplug the power cord 

immediately and contact the customer service center. 

  When the device isn’t used for a long time, the adaptor and memory card can be 

removed and placed in dry environment. 

  When moving, please hand over the manual to new tenant for proper usage of the 

device. 

Содержание S213K


































Отзывы: