Dnake 902D-B6, Руководство пользователя

Страница: 25 / 28

22
Installation method:
1. According to the installation dimension of door station, dig a square
groove at the appropriate position in the wall or door, and dig a hole
(drainage hole) at the bottom;
2. Drill the threading holes at the bottom of the flush mounting box to
facilitate drainage. Upward arrow is on the front of the flush mounting box.
Embed the flush mounting box into the wall, then put it into the groove in
the wall, and tighten four screws from top to bottom of the flush
mounting box, or fix the flush mounting box in the wall with concrete;
3. Assemble the door station into the flush mounting box, align the groove
and the flush mounting box, tighten the screws, and finally inject the glass
glue into the top, left and right sides of the door station(note: the glass
glue cannot be injected into bottom part that is reserved for the drainage
hole at the bottom of door station).
[Suggestion]: The camera should be 1450
〜
1550mm above the ground. The camera at this
height can capture human face perfectly.
Installation Instructions:
400~500mm
1
4
5
0
~
1
5
5
0
m
m
Wall