DNA M-PAD, Руководство пользователя

Страница: 15 / 41

15
7.3 Select the Backlit RGB Color of 8 Pads
Press “ GLOBAL ” and “ > ” button and the LCD displays “ RGB OFF ” , then press
“ VALUE ” button to adjust RGB color for the pads when the LCD displays “ RGB
ON ” . The Faders F1, F2 and F3 are used for RGB color. F1 is for red color. F2 is for
blue color and F3 is for green color. Press the pad you want to change the RGB
color and then operate the fader F1,F2,F3 to change the RGB color of this pad. Press
“ VALUE ” button to exit the RGB color setting mode. The operate steps are
following:
(1)
Press the “ GLOBAL ” button and then “ > ” button for one or two times until
the LCD displays “ RGB OFF ” . Then press “ VALUE ” button for one or two
times until the LCD displays “ RGB ON ” .
(2) Press one of the 16 PADs and the LCD displays “ PAD ” .
(3) Operate F1,F2,F3 to change the RGB color of the pad. During operation, the LCD
displays the current RGB color No. on the bottom-left corner. Maximum is 127,
0 means LED lights off.
(4) Press the “ VALUE ” button to exit the RGB color setting mode.
(5) Reference RGB No. for some colors:
COLOR R. G. B
WHITE 127 127 127
BLACK 0 0 0
RED 127 0 0
GREEN 0 127 0
BLUE 0 0 127
CYAN 0 127 127
MAGENTA 127 0 127
YELLOW 127 127 0
ORANGE 127 82 0
7.4 Page3-MUTE
In MUTE ON mode, any message cannot be send. Press [ENTER] to switch the MUTE
mode.