DNA ASS1010, Инструкция по эксплуатации, Страница: 10 / 12

10
Installation
Before you drill or cut any holes, investigate your car’s layout very carefully.
Take special care when you work near the gas tank, fuel lines, hydraulic lines
and electric wiring.
Step 1:
Place the mounting brackets on the
aluminum base and
fi x them tightly
with the 4mm x 8mm screws.
Step 2.
Find a suitable location in the vehicle in
which to mount the subwoofer. A typical
location is shown (right). Other areas
include: boot and under the parcel shelf.
Make sure there suf fi cient air
circulation around the intended
mounting location.
Step 3.
Place the subwoofer in the desired
location. Mark screw mounting points
and drill out with 2.5mm (1/8 inch) drill.
Mount using the 4 x 15mm screws.
Step 4
Attaching the bass boost remote control,
mount with mounting screws (4mm x 15mm)
at an easily accessible location such as
under the dashboard.