DNA ASS1008, Инструкция по эксплуатации

Страница: 7 / 12

7
Unit Functions
1. Remote Control Input
Plug in to operate the remote subwoofer volume control.
2. Phase Switch
Use this switch to help compensate for time alignment issues in your
system. Such problems usually occur when the subwoofer is further away to
the listener compared to the vehicle speakers in the system.
3. Crossover Frequency Adjustment
This control permits you to defi ne the frequency you want the subwoofer to
receive. The subwoofer will reproduce all sound below the frequency you
set.
4. Gain (Volume) Adjustment
a.) After you have installed your system, turn this control to a minimum.
b.) Turn the head unit on; the subwoofer will turn on via the remote
connection. Turn the head unit volume to about 66% full level.
c.) Slowly turn up the subwoofer gain control unit, you will hear a small
amount of distortion. Then reduce the level until the distortion is
completely gone. Leave the control at this setting.
5. Power indicator light
6. Fuse
7. Power Terminals
8. High Level Inputs
9. Low Level RCA Inputs
Low level RCA inputs are recommended to deliver audio signal to
the subwoofer.