DMX-LED-Dimmer X9 HR
8
DMX-Fail option
from 06/2013 (Version 2)
The DMX-LED-Dimmer X9 can hold the last value, switch on or switch off the LED
outputs on DMX fail.
This DMX-Fail option is selectable with the
Jumper.
Setting the operation mode
The
DMX-LED-Dimmer X9 HR
has 2 operation modes adjustable via the
configuration switch 4:
Switch 4 OFF: Controlling the outputs via one DMX-channel
In this operation mode each output has a LookUp table.
This displays the outputs 16Bit-resolution for the available 256 values of
the DMX-channels. The LookUp tables are linear programmable ex ante
and freely programmable.
Switch 4 ON: Controlling the outputs via two DMX-channels
Each output has a 16Bit resolution. For a direct calling via DMX, 2 DMX-
channels are used per output. The 2. DMX-channel is for the subtle
settings.
