ArtNet-DMX Mux24
17
Fit the output values of the analog inputs
For the analog inputs it is possible to adjust the assignment of the input value to the
output value.
In this case, the input must be configured as analog 0-10V and the assignment must
be adding in the parameter input.
To adjust the assignment, a parameter input according to the following structure is
necessary:
CH=[INL-INH]:[OUTL-OUTH]
CH
DMX channel
INL
Input voltage LOW in V
0V up to 10V in 0.1V steps
INH
Input voltage HIGH in V
0V up to 10V in 0.1V steps
OUTL
Output value LOW
0 up to 255
OUTH
Output value HIGH
0 up to 255
10V
INH
INL
OUTL
OUTH
DMX
U
IN
The analog input must be configured as analog 0-10V and INL must be smaller
than INH !
