
MU-N-B00040
Instructions Roundhouse extension N Gauge
Add support
B
to both sides of
A
and fix the support (
in
AB
the picture) to the base using the holes marked
A1
. On the
side where the extension meets up with the roundhouse also
glue them in the holes marked
C1
.
B
A
B
Next fix the rear wall
s D
, the same way as done in the
roundhouse.kit.
Glue support
C
in the holes marked
C1
of the base.
Then attach the side wall (made as per instructions in the
roundhouse kit) to both support and base.
1
2
4
First trim back one side of the base with 1mm.
Which side you use depends on whether you want to add the
extension to either the left or right side of the roundhouse.
The trimmed side attaches to the roundhouse.
Glue the base to the base of the roundhouse (MU-N-B00035).
C1
Stütze AB
D
3
F+G
Now the windows can be added. The black cardboard
F
is first
glued to the inside of the side walls. Check their position before
fixing them !
Next glue the transparent film on the black cardboard.
Finally glue the light grey cardboard
G
onto the transparent film.