Instructions for installation and commissioning conventional of fire alarms D9000 series
Fig.2
Fig.3
Fig.4
Place the detector base and rotate it .
–
If the detector is locked to the base, to unlock it , insert first the key to the specified location
(Fig. 4) and rotate the detector counterclockwise;
–
Test the detector to check the correct operation of the LED
indication;
–
During normal operation, the LEDs blink for 16 seconds.
2.
Testing and Maintenance
T
esting
–
Apply power
;
–
Wait about a minute or until the detector begins to blink
;
–
Activate the detector test spray and / or temperature sonda. The two red LEDs must illuminate
permanently.
Service maintenance
–
Visual inspection for mechanical damage and pollution
- once a year;
–
Verification of performance
- once a year;
–
Prophylactic cleaning
-
depending on the environment in which it is located.
Optical detectors D9000 SR/MSR are software tested and when the detector is contaminated, it is signaled
by flashing LEDs for 2 seconds to 2 seconds .
D9000 Series detectors are compatible with all conventional power plants, that have met the requirements
of a standards EN54.
The detectors are available with three types of bases:
–
In 9000
-
a standard basis
;
–
In 9000D
-
standard base with diode for recording damage detector down;
–
In 9000R
- s
tandard base with relay output 12V for security panels
.
3.
Warranty obligations
The manufacturer guarantees the conformity of the device with standards EN 54-5 and EN54-7. The
warranty period is 24 months from the date of sale , provided that
:
–
the conditions of storage and transport have been followed
;
–
release is performed by authorized persons;
–
the requirements for operation stated in this instruction have been abode.
–
defects are not caused by natural phenomena and accidents of the plug socket.
When there is the need of warranty repair , please contact us by phone or email to give you guidelines for
the warranty obligations of the company. Repairs are carried out in the company's service company.
Tel./Fax: +359 64 801 597
e-mail: [email protected]
DMTeh wishes you pleasant work!