
ISO 9001:2008 Certified Company
№ 34, етаж 5,
Tel./Fax:
064 801 597
e-mail:
web: www.dm-teh.com
Address:
Pleven, Bulgaria 5800
ул.”Ген.л-т Ат. Стефанов”
Installation and operation conventional fire detectors
D9000 series
Nom.№
Type
Characteristics
Sensitivity / Class
1001
D9000 SR
Optical smoke detector
EN 54-7
1002
D9000 T /
A1R
Rate of rise heat detector
A1R, EN 54-5
1003
D9000 T /
A1S
Fixed temerature heat detector
A1S, EN 54-5
1004
D9000 MSR
Combines optical smoke and heat detector
A1R, EN 54-5 / EN 54-7
Caution : Read this manual before attempting to install the detector.
1.
Technical s
pecifications
–
Supply voltage
9-30 V DC
–
Power consumption in Duty condition
≤ 130 µА
–
Consumption in " Fire " condition
20 mА/ 24V DC
–
limiting resistor output
2kΩ
–
Degree of protection
IP 40
–
Cross section of the connecting wire
0,4÷2,0 mm2
–
Operating temperature range
10ºС ÷ 50ºС
–
Humidity
(93 ± 3)% при 25ºС
–
Dimensions with base
f 100mm h ≤ 52mm
–
Weight
≤ 100g
–
Mounting the detector
–
Choose the place (according to the plans of the project) for the installation of the detector ;
–
Mount the base with appropriate fixings ;
–
Connect the electrical cables according to the attached diagram ( Figure 1) ;
);
Fig.1
–
Place the detector base and rotate clockwise till matching markers
;
–
If you want to lock detector :
:
Pre remove the key from the base ( Figure 2).
Break the plastic at the specified location on the bottom of the sensor ( Figure 3 )
.