manualshive.com logo in svg

DMT 101810, Руководство пользователя

Поделиться
Скачать
DMT 101810 Скачать руководство пользователя страница 7

 

 

 

6 

 

  

 

 

Alpha Series A3.9i 

Product code: 101810 

2.

 

Safety 

 

Important 
Read and follow the instructions in this user manual before installing, operating or 
servicing this product. 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual. 

 

Warnings and Safety Instructions 

 

DANGER 
Electric shock caused by dangerous voltage inside 

There are areas within the device where dangerous touch voltage may be present. 

●

 

Do not open the device or remove any covers. 

●

 

Do not operate the device if the covers or the housing are open. Before operation, check if the 
housing is firmly closed and all screws are tightly fastened. 

●

 

Disconnect the device from electrical power supply before service and maintenance, and when the 
device is not in use. 

 

DANGER 
Electric shock caused by short-circuit 

This device falls under IEC protection class I. 

●

 

Make sure that the device is electrically connected to ground (earth). Connect the device only to a 
socket-outlet with ground (earth) connection. 

●

 

Do not cover the ground (earth) connection. 

●

 

Do not bypass the thermostatic switch or fuses. 

●

 

Do not let the power cable come into contact with other cables. Handle the power cable and all 
connections with the mains with caution. 

●

 

Do not modify, bend, mechanically strain, put pressure on, pull or heat up the power cable. 

●

 

Make sure that the power cable is not crimped or damaged. Examine the power cable periodically 
for any defects. 

●

 

Do not immerse the device in water or other liquids. Do not install the device in a location where 
flooding may occur. 

●

 

Do not use the device during thunderstorms. Disconnect the device from the electrical power supply 
immediately. 

 

Attention 
Power supply 

●

 

Before connecting the device to the power supply, make sure that the current, voltage and 
frequency match the input voltage, current and frequency specified on the information label on the 
device. 

●

 

Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the 
required power consumption of the device. 

Содержание 101810













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды