Zone
Settings
Radio Settings
19
18
To access this item, press the Menu key in the home screen and then
select “Zone”.
This radio supports up to 64 zones. You can use this menu to select
your desired zone.
To access this item, press the Menu key in the home screen and
then select “Settings”.
You can optimize your radio performance by customizing related parameters according to actual needs and your preferences.
Language
To set the language in which all interface information is displayed. Currently,this radio only supports two languages:Chinese and
English.
Tx Power
This option allows you to set TX power level. Alternatively, you can change the power level by pressing the shortcut key for Adjust
Power Level in the home screen.
There are two levels available: High (indicated by )and Low (indicated by ).High power level enables you to communicate with
farther team members.
Note: Power level should be set for each channel individually.
Lone Worker
This function can trigger off the Emergency mode if the radio does not work for a certain time period. This parameter determines
whether to enable the Lone Worker function.
Tone
To set tones for your radio. You can set the following tones:
•
Radio Silent: to set whether the radio will give tone indication. If Silent On is selected, all tone indication will be cancelled.
•
Call
End
Tone:
to
set
whether
the
radio
will
give
tone
indication
when
the
call
ends.
•
Private
Call Tone: to set whether the radio will give tone indication when it receives a private call.
•
Text Message
Tone: to set whether the radio will give tone indication when it receives a message.
•
Keypad
Tone: to set whether the radio will give tone indication when you are making keypad operations.
•
Group
Call
Tone:to
set
whether
the
radio
will
give
tone
indication
when
the
radio
received
a
group
call.
•
Signaling
Side
Tone:to
set
whether
the
radio
will
give
tone
indication
when
PTT
is
pressed
(during
transmission
of
PTT
ID).
Squelch
This option allows you to select an appropriate squelch level. Alternatively, you can change the squelch level by pressing the shortcut
key for Adjust Squelch Level in the home screen.
There are three levels available: Tight, Normal and Open. The default squelch level is “Normal”, and is often used in low noise
environment.
And generally, “Tight” is used in high noise environment. It requires stronger signal for the radio to unmute. However, if the squelch
level is set to Open, the speaker will keep unmuted irrespective of the decoding conditions.
Scrambler /Encrypt
To set whether to enable the Scrambler/Encrypt feature.
LED
•
All
LEDs:to
enable/disable
all LED indications.
•
TX
LED:to
set
whether
the
Tx
LED
indicates
during
transmission.
•
RX
LED:to
set
whether
the
Rx
LED
indicates
during
reception.
•
Scan
LED:to
set
whether
the
Scan
LED
indicates
in
Scan
mode.
•
Carrier
LED:to
set
whether the Carrier LED indicates when receiving carrier.
VOX
•
On/Off
•
If“On”
is selected,it allows the user to make calls every time the user speaks into the radio directly without pressing the
PTT
key.
•
If“Off”is
selected,the user should make calls by pressing the PTT key.
L
H
