DMP Electronics Thinline 7300 Series, Инструкция по установке и программированию

Страница: 15 / 28

7300 Series Installation and Programming Guide | Digital Monitoring Products, Inc. 11
Panic Key
Configure the two left Select keys as 2-button Panic. The display
shows the current setting as a binary value. To turn on the panic
key operation, enter 1 . To turn off the panic key, enter 0 . The default
is 0 (off).
Emergency Key
Configure the two middle Select keys as 2-button Emergency. The
display shows the current setting as a binary value. To turn on the
panic key operation, enter
1
. To turn off the panic key, enter
0
. The
default is 0 (off).
Fire Key
Configure the two middle Select keys as 2-button Fire. The display
shows the current setting as a binary value. To turn on the panic
key operation, enter 1 . To turn off the panic key, enter 0 . The default
is
0
(off).
Number of User Code Digits
Enter the user code digit length used by the panel. Range is 4 to 6.
The default is 4 .
CONFIGURE PANICS AND USER CODE DIGITS