DMP Electronics ITI 738I, Инструкция по установке и программированию

Страница: 13 / 24

Digital Monitoring Products, Inc. | 738I ITI™ Installation and Programming Guide 9
Zone Number
Enter the two-character zone number (01 - 96) to be
programmed. If the zone number is less than 10, enter a
leading zero, such as 01. Refer to Table 3 for Keypad Bus Zone
numbers. Press CMD to accept the entry.
For LX-Bus Zone Numbers, enter the right two digits of the
zone number. The panel automatically enters the hundreds
digit representing the LX-Bus slot where the card is installed.
See Tables 4 and 5. Press
CMD
to accept the entry.
ZONE NO:
KEYPAD
ADDRESS
ZONE NUMBERS
XT30/XT50 XR150/XR550
1 11 to 14 11 to 14
22 21 to 24 21 to 24
3 31 to 34 31 to 34
4 41 to 44 41 to 44
5 N/A 51 to 54
6 N/A 61 to 64
7 N/A 71 to 74
8 N/A 81 to 84
Note:
XR550 Series panels support 16 addresses. 738I only
supports 8 addresses.
Table 3: ITI Wireless Receivers Supported