eBox-2300SX-NWP User’s Manual
DMP Electronics Inc.
E-mail: [email protected]
Http://www.compactpc.com.tw
IV
R
EGULATORY
FCC
C
LASS
A
N
OTE
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference in which case the user will be
required to correct the interference at his own expense. Testing was done with
shielded cables. Therefore, in order to comply with the FCC regulations, you must
use shielded cables with your installation.
WARNING
This product complies with EN55022 class A. In a domestic environment this
product may cause radio interference in which case the user may be required to take
adequate measures.
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus as set out in the interference - causing equipment standard
entitled “Digital Apparatus”, ICES-003 of the Department of Communications.
M
ANUFACTURER
’
S
D
ECLARATION OF
C
ONFORMITY
This equipment has been tested and found to comply with the requirements of
European Community Council Directives 89/336/EEC and 73/23/EEC relating to
electromagnetic compatibility and product safety respectively.
A
TTENTION
This product has been designed and certified to comply with certain regulatory
requirements pertaining to Information Technology Equipment. This product has not
been designed for use as a medical device. Without limitation of the foregoing, this
product is not intended and has not been certified for use in a hospital or clinical
environment to diagnose, treat, or monitor patients under medical supervision, and is
not intended and has not been certified to make physical or electrical contact with
patients, nor to transfer energy to or from patients and/or to detect such energy
transfer to or from patients.
