DMP Electronics 9800INT Series, Инструкция по установке и программированию

Страница: 19 / 52

9862INT Series Installation and Programming Guide 15
PROGRAM THE PANEL
If using an XT Series International Panel, enter 665 (PRO) then press CMD at the keypad
to access the PROGRAMMER menu. If using an XR Series International Panel, enter
6653 (PROG) then press CMD .
After completing each of the following steps, press CMD to advance to the next option.
Refer to the panel programming guide as needed.
DEVICE SETUP
Advance to DEVICE SETUP , then press a select area to enter
the setup menu.
Device Number
Set the keypad address at 1-16 for XR550 Series panels or 1-8
for other compatible panels.
Device Name
Press any select area, then enter a name for the wireless
keypad.
DEVICE SETUP
DEVICE SETUP
DEVICE NO: -
DEVICE SETUP
*UNUSED*