background image

1100T INSTALLATION GUIDE     |     DIGITAL MONITORING PRODUCTS 

3

ADDITIONAL INFORMATION

Replace the Battery

1.  Open the translator housing to expose the inside of the 1100T. 
2.  Remove the PCB board
3.  Unplug the battery connector, then remove the old battery
4.  Place the new battery in the holder.
5.  Connect the battery connector
6.  Snap the PCB Board back in place.
7.  Snap the cover back on the 1100T.

Содержание 1100T

Страница 1: ...options 4 Press CMD again to open the extended options menu 5 Select 1100T and press CMD to save 6 Enter the Serial number 7 At 1100T FREQ select any select key or area to select the non DMP system Default is HWL Honeywell 8 Press CMD Zone Information 1 In ZONE INFORMATION enter the wireless zone number 2 At UNUSED enter the zone name 3 Select a ZONE TYPE 4 At DMP WIRELESS select NO 5 At COMP WLS ...

Страница 2: ...OUNT THE TRANSLATOR The translator must be mounted using the provided 6 screws in the four mounting holes Mount the translator in a secure dry place away from metal objects to protect the panel from damage due to tampering or the elements Mount the translator a minimum of 4 feet from any wireless panels or repeaters It is not necessary to remove the PCB when installing the enclosure 4 POWER THE TR...

Страница 3: ...attery 1 Open the translator housing to expose the inside of the 1100T 2 Remove the PCB board 3 Unplug the battery connector then remove the old battery 4 Place the new battery in the holder 5 Connect the battery connector 6 Snap the PCB Board back in place 7 Snap the cover back on the 1100T ...

Страница 4: ...radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is e...

Отзывы: