1/4-20 x 1/2"
Button Head Screw
Bottom View
7206.001-40
Bottom Shelf Bracket
Washer Lath Screw
#8 x 9/16"
1/4-20 Serrated
Flange Nut
7206.001-41-1
Metal Connector-Back
Step 1
- Assemble the Lower Half of the Display.
-Attach Back Metal Connector to the Bottom Right and Left Panels
using 1/4-20 x 1" button head screws and 1/4-20 serrated flange
nuts as shown. Orient the slots Upward as shown.
-Attach Bottom Shelf Bracket to Bottom Shelf Board using #8 x 9/16"
washer lath screws. Note: Bottom Shelf Board has pre-drilled holes
on one side to accept the lath screws.
-Attach Bottom Shelf Board and Bottom Shelf Brackets to the
Bottom Right and Left Panels using 1/4-20 x 1" button head screws
and 1/4-20 serrated flange nuts.
-Attach Front Metal Connector (No holes on face) to the Bottom Right and Left Panels
using 1/4-20 x 1" button head screws and 1/4-20 serrated flange
nuts as shown.
-Attach Bottom X-Braces to the Back Metal Connectors using 1/4-20 x 1/2"
button head screws and 1/4-20 serrated flange nuts. Also Connect X-Brace in center
where they intersect with the same fasteners.
Page: 3 of 6
DATE
Part - 7206.002
Curve Display - Wood Tower
ASSEMBLY INSTRUCTIONS
1/17/17
Orient the slots upwards
as shown
Bottom Left Panel
7206.001-65L
Metal Connector-Back
7206.001-41-1
Metal Connector-Front
7206.001-41-2
Bottom Shelf Board
7206.001-67
Bottom Right Panel
7206.001-65R
7206.001-42-2,
Bottom X-Brace
Connector
on Front Metal
No Holes
Orient the slots upwards
as shown
7206.001-42-2,
Bottom X-Brace
1/4-20 x 1"
Button Head Screw
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263
Design Master Displays
DMD
5657 Prospect Street
High Point, NC 27263