SAFETY OPERATION MANUAL
5 of 6
COPYRIGHT© 2001
ALL RIGHTS RESERVED
12/01
REV. A
FILE #: SOM0021
DOC. #: PH1005-SOM
DANIELS MANUFACTURING CORP. 526 THORPE ROAD, ORLANDO, FL 32824, USA
PHONE (407) 855-6161 • FAX (407) 855-6884 • WWW.DMCTOOLS.COM • E-MAIL: [email protected]
GAGING DIMENSIONS FOR PH1005:
.079
±.003
.057
±.003
FIGURE 4
.049
±.003
WHEN CHECKING GAGING
DIMENSIONS, HOLD JAWS
TOGETHER TO INSURE A
FULLY CLOSED POSITION.
CRIMP
CAVITY
GAGE
P/N
G739
G740
G741
22-16
16-14
12-10
"GO"
DIM A
.046
.054
.076
"NO-GO"
DIM B
.052
.060
.082
GREEN "GO"
RED "NO-GO"
A
B
GAGE
FIGURE 5
PH1005 SYSTEM COMPONENTS:
PART NUMBER
PHMT1005
PHRPU4
PHVG
DESCRIPTION
CRIMPING TOOL
REMOTE POWER UNIT
VACUUM GENERATOR
QTY
1
1
1
DESCRIPTION
BENCH MOUNT
FOOT PRESS
POWER TOOL SYSTEM ACCESSORIES:
PART NUMBER
BM-2
PHFV-3
SAFETY SIGNAGE
Safety signs are placed on the PH1005 Power Crimp Tool to make you aware that this tool could seriously injure or
maim you if care is not used while operating it.
These signs are intended as a constant reminder of the potential risk involved. These signs should never be removed
and should be replaced as needed.
Signs alone will not prevent accidents from occurring. Operators must be properly trained in the use of the equip-
ment and be aware of the risks involved. While using the tool, it is important to be alert and avoid distractions.