DMC Econo-Mizer 982, Руководство пользователя

Страница: 8 / 16

8 PNEG-1139 Econo-Mizer
3. Installation and Operation
Installation
Figure 3A
Hanger Brackets and Chains
(Figure 1)
The hanger brackets should be positioned equally spaced around the outer fill hole lip of the bin. Do not
tighten the bracket hardware until the spreader has been installed and leveled. Hang the spreader from
these brackets by hooking the two (2) chains that are attached to each of the spreader support arms to
two (2) adjacent hanger brackets. When properly hung, each set of chains will form a “V” and will restrict
random movement of the spreader.
The spreader can be installed at various heights in the bin depending on the bin diameter and roof angle.
The spreader should be installed as level as possible by checking with a level and adjusting the position
of the hanger brackets and/or the lengths of the chains.
Finish the installation by securely tightening the hanger brackets.
Wiring: Refer to Wiring Diagram on Page 9 and Table A and Table B on Page 10.
Figure 1
Figure 4
Figure 3
Figure 2