▯
Intended Use
The torch is designed for use both indoors and outdoors. The
torch is intended purely for private use and not for commercial
purposes or other usage.
The torch is not suitable for lighting rooms within a household.
▯
Observe the Safety Information
Read and observe all the safety information to protect yourself
and the environment from any harm. Refer to the information
sheet enclosed for further information on safety.
CAUTION! RISK OF INJURY!
The electric arcs and hot contacts
2
could cause burns.
▸
Never reach into the electric arcs.
▸
Never touch the contacts
2
when operating the electric arc lighter.
▸
Always hold the electric arc lighter a safe distance from your face,
skin, clothing and inflammable objects.
▯
General View
The illustration below depicts the electric arc lighter in detail.
1
Cap
4
Safety catch
7
Lamp head
2
Contacts
5
Press switch
8
USB cable
3
Latch
6
MicroUSB port
▯
Checking the Package Contents
Check the package contents carefully before putting the device
into operation. If anything is missing or damaged, please contact
our Service partners.
▸
1 × electric arc lighter with torch and built-in battery
▸
1 × USB cable
▸
1 x gift box
▸
1 × manual
▯
Charging the Electric Arc Lighter
The electric arc lighter is equipped with a built-in rechargeable bat-
tery. Charge the battery fully before attempting to use the device
for the first time.
1. Pivot the safety catch
4
away from the cap
1
.
2. Press on the latch
3
to open the cap
1
.
3. Connect the USB cable
8
to the micro USB port
6
.
4. Connect the USB cable
8
to a USB charger via the USB-A
connector.
5. A blue indicator lamp beside the micro USB port
6
lights up
during the charging process.
6. Disconnect the USB cable
8
from the micro USB port
6
when
the charging process has finished. The blue indicator lamp
beside the micro USB port
6
goes out when the battery is fully
charged.
7. Close the cap
1
and pivot the safety catch
4
against the
cap
1
.
The electric arc lighter only fulfils the requirements of the protec
-
tion type specified when the cap
1
is closed and locked by the
safety catch
4
.
▯
Operating the Electric Arc Lighter
The electric arc lighter automatically switches off after 7 seconds
for reasons of safety.
1. Pivot the safety catch
4
away from the cap
1
.
2. Press on the latch
3
to open the cap
1
.
3. Press and hold the press switch
5
to generate an electric arc
between the contacts
2
. Allow the object to be ignited to make
contact with the electric arc without blocking the electric arc.
4. After use, close the cap
1
and pivot the safety catch
4
against
the cap
1
.
The electric arc lighter only fulfils the requirements of the protec
-
tion type specified when the cap
1
is closed and locked by the
safety catch
4
.
Cleaning the Contacts
CAUTION! RISK OF INJURY!
The electric arcs and hot contacts
2
could cause burns.
▸
While cleaning the contacts
2
, never press the press switch
5
.
▸
Allow the contacts to cool down
2
before cleaning them.
Clean the contacts
2
at regular intervals or when the electric arcs
are not generated properly. Use a cotton bud or brush to clean the
contacts.
▯
Operating the Torch
You can only use the torch when the cap
1
is closed.
The torch can operate in the following three operating modes
which are selected by pressing the press switch
5
.
The switching cycle of the operating modes is as follows:
Operating mode 1
è
Off
è
Operating mode 2
è
Off
è
Operating
mode 3
è
Off
Operating
mode 1
Maximum brightness
Operating
mode 2
Energy-save mode
Operating
mode 3
Flashing mode
Press the press switch
5
as often as necessary until the required
mode is activated.
1. Press the press switch
5
to select operating mode 1.
2. Press the press switch
5
to switch the torch off.
3. Press the press switch
5
to select operating mode 2.
Use this sequence of steps to select the operating mode required
for the torch.
▯
Technical Data
Designation
ELG102 electric arc lighter
Weight
60 g
Dimensions
95 x 36 x 26 mm
Battery
3.7 V, 360 mAh, built-in
Illuminant
(not replaceable)
1 W LED
Lighting period
Approx. 2.5 hours (compliant with ANSI
standard)
Lighting range
Max. 50 meters (compliant with ANSI
standard)
Brightness
Max. 100 lumen
Service life (LED)
Approx. 10,000 hours
Functions
Electric arc lighter
Torch with 3 operating modes (maximum
brightness, energy save mode, flashing
mode)
Type of protection
IP56 (dustproof and splashproof)
G
G
G
G
G
G
G
▯
Manufacturer
GO Europe GmbH
Zum Kraftwerk 1
D-45527 Hattingen
GERMANY
GO Europe GmbH
Zum Kraftwerk 1
45527 Hattingen
GERMANY
10 / 2020
Art.-No. 40411
1
2
3 4 5
6
7
8
Electric Arc Lighter with Torch
▯
For Your Safety
Read the manual thoroughly and observe the information
contained when using the device. Keep the manual close
by for future reference.
Refer to the information sheet enclosed for important
information on the subjects of safety, disposal, guarantee and
product care.
