▯
Intended Use
The product is designed for use both indoors and outdoors. The
product is intended purely for private use and not for commercial
purposes or other usage.
The portable work light is not suitable for lighting rooms within a
household.
▯
Observe the Safety Information
Read and observe all the safety information to protect yourself
and the environment from any harm. Refer to the information
sheet enclosed for the relevant information on safety.
WARNING! RISK OF FATAL INJURY THROUGH ELECTRIC
SHOCK!
NEVER use the power adapter
10
if you suspect damage to
the power adapter
10
or see damage to the power
adapter
10
.
▸
Do not put the device into operation if it is damaged.
▸
Never open or repair the power adapter
10
yourself.
▸
Never touch the bare contacts with metallic objects.
▸
Never plug in or unplug the power adapter
10
with wet hands.
IMPORTANT! RISK OF PROPERTY DAMAGE THROUGH
ENVIRONMENTAL INFLUENCES!
Unfavourable environmental influences could cause damage to
the power adapter
10
or impair its function.
▸
Prevent exposing the device to environmental influences such as
smoke, dust, vibration, chemicals, moisture, heat or direct sunlight.
▸
The power adapter
10
is not waterproof so keep it dry.
▯
General View
The illustration depicts the work light in detail.
1
Housing
5
Status indicator
9
USB cable
2
Handle
6
Micro USB port
10
Power adapter
3
Protective cover
7
Press switch
4
USB-A connector
8
Legs
▯
Checking the Package Contents
Check the package contents carefully before putting the device
into operation. If anything is missing or damaged, please contact
our Service partners.
▸
1 × work light (including built-in Li-ion battery)
▸
1 × USB cable
▸
1 × power adapter
▸
1 × transport case
▸
1 × manual
▯
Charging the Work Light
The work light is equipped with a permanently built-in Li-ion bat-
tery. The battery must be fully charged before being used for the
first time.
The four LEDs of the status indicator
5
indicate the charge status
of the Li-ion battery.
1. Open the protective cover
3
.
2. Connect the USB cable
9
to the micro USB port
6
.
3. Connect the USB cable
9
to the power adapter
10
supplied via
the USB-A port.
4. Plug the power adapter
10
into a power socket.
5. During the charging process, one of the four LEDs of the status
indicator
5
flashes.
6. Disconnect the USB cable
9
from the micro USB port
6
when
the charging process has finished. When the Li-ion battery is
fully charged, all four LEDs in the status indicator
5
light up
continually.
7. Close the protective cover
3
.
Charge the work light each time after it has been used.
The work light only fulfils the requirements of the type of protec
-
tion specified when the protective cover
3
is closed.
▯
Operating the Work Light
You can transport the work light comfortably using the handle
2
.
The fold-out legs
8
ensure the work light stands securely.
The work light can operate in the following three operating modes
which are selected by pressing the press switch
7
.
The switching cycle of the work light operating modes is as follows:
Operating mode 1
è
Operating mode 2
è
Operating mode 3
è
Off
Operating
mode 1
COB working light (middle)
Operating
mode 2
COB working light (ring)
Operating
mode 3
Red flashing light
Press the press switch
7
as often as necessary until the required
mode is activated.
Powerbank Function
The work light is provided with a powerbank function to charge
mobile devices via USB.
1. Open the protective cover
3
.
2. Connect the device to be charged to the USB-A connector
4
using a USB cable. During the charging process, the four LEDs of
the status indicator
5
light up.
3. Disconnect the USB cable from the micro USB-A connector
4
when the charging process has finished.
4. Close the protective cover
3
.
The work light only fulfils the requirements of the type of protec
-
tion specified when the protective cover
3
is closed.
G
G
G
G
G
G
▯
Technical Data
Designation
WLG302 portable work light
Main material
Aluminium and ABS
Weight
881 g
Dimensions
193 x 180 x 65 mm
Battery
3 × type 18650 (2200 mAh), built-in
Illuminant
(not replaceable)
20 W COB work light
Lighting period
Approx. 4.5 hours (compliant with ANSI
standard)
Lighting range
Max. 70 meters (compliant with ANSI
standard)
Brightness
Max. 1500 lumen
Service life (LED)
Approx. 50,000 hours
Functions
3 operating modes (COB working light
(middle), COB working light (ring), red
flashing light)
Powerbank function
Type of protection
IP55 (dustproof and splashproof)
▯
Manufacturer
GO Europe GmbH
Zum Kraftwerk 1
D-45527 Hattingen
GERMANY
9
10
1
2
3
4
5
6
7
8
Portable Work Light
▯
For Your Safety
Read the operating manual thoroughly and observe the
information contained when using the device. Keep the
manual close by for future reference.
Refer to the information sheet enclosed for important information
on the subjects of safety, disposal, guarantee and product care.
G
GO Europe GmbH
Zum Kraftwerk 1
45527 Hattingen
GERMANY
11 / 2020
Art.-No. 40409
20201111_uni_taschenlampe_wlg302.indd 2
20201111_uni_taschenlampe_wlg302.indd 2
11.11.2020 10:00:04
11.11.2020 10:00:04