Countertop Installation Precaution
Vessel Sink & Countertop Installation
CAUTION - IMPORTANT HANDLING INSTRUCTION.
NEVER LIFT OR CARRY THE COUNTERTOP FLAT.
01.
02.
03.
04.
BEFORE INSTALLATION
Examine and inspect the stone carefully ensuring no defects. If defects are found, DO NOT
PROCEED WITH INSTALLATION and inform your dealer immediately.
LIFTING COUNTERTOP
- Professional 2-Person crew required who are capable of handling the weight of heavy stone
tops. You may require 3-Person crew for double vanity tops. Lift the countertop from the front edge, bringing to a vertical
position, while keeping the back edge in the box. IT IS IMPORTANT to support the countertop in a vertical position.
Support the countertop from the bottom and centre weight. Double vanity countertops may crack easily without proper
center support.
If you have a DM Bath Backsplash and/or Side
Splash, install next. Apply 100% Silicone Sealant
on the back of the backsplash/sidesplash. Vertically
align back/side splash making sure it is aligned to
countertop. Press into place.
Clean the surface of vessel cut-out on countertop.
Generously apply 100% Silicone Sealant around the
bottom of the vessel sink. Position sink under the
opening. Hold the sink in place. Immediately wipe
away any excess sealant.
Complete the faucet and drain installation according
to Manufacturer’s Installation guide.
Read lifting pre-caution above. Remove the
countertop from the box while maintaining its
vertical position. Lift countertop over cabinet base
carefully while still maintaining its vertical position.
Gently place the edge of top at the back of the
cabinet making sure aligned. Lower top to cabinet
make sure both ends come down at the same rate.
36" single
36" single
36" single
60" single
4